FAQ

This issue usually occurs because the device parts are not assembled correctly. To use it safely: Ensure all parts, including the bowl, lid, and blades, are properly in place. Before turning on the device, make sure all components are securely locked. Following the correct assembly not only resolves this issue but also enhances safety and prolongs the device’s lifespan.

This issue usually occurs if the chute container is not emptied on time. To prevent leaks: Empty the container immediately after each use or whenever it becomes full. Regularly clean and inspect the container to ensure optimal performance. Following these steps helps prevent liquid spills, maintain device efficiency, and extend its lifespan.

The juice extractor’s feed chute is designed to fit a whole apple, allowing you to insert fruits without large cuts, making the juicing process quick and easy.

Refer to the user manual to select the appropriate speed for various ingredients.

Jamming or improper grinding is usually related to the type and preparation of the meat and the correct use of the blades. To fix the issue: Use meat without cartilage or bones. Cut meat into small pieces and refrigerate for a few minutes to slightly firm it. After each use, clean the blades with lemon water to remove fat and meat residues. Note: Ensuring the blades are correctly positioned and using the appropriate grinding plate is essential for proper operation. Following these steps ensures even grinding and prevents jamming or damage to the motor.

For home meat grinders, you can grind a maximum of 5 kilograms of meat per session.

No, the meat grinder is not recommended for hard or watery foods. Using it for such items may cause the device to jam or damage the blades and motor. It is designed to grind boneless meat uniformly, and using it outside this range can reduce performance and lifespan.

The reverse function is used when meat gets stuck in the auger. Activating reverse moves the meat back toward the feed chute, preventing jamming. This allows you to quickly and safely resolve blockages without fully disassembling the device.

Unusual noise usually occurs due to improper assembly or misaligned parts. Make sure all components, including the blades, grinding plates, and auger, are correctly and fully assembled. Before turning on the device, check that no part is loose or out of place.

The blades of the NasaElectric NS-626 food processor are located in the sliding container beneath the device’s control knob, right under the logo. To access the blades, simply pull out the sliding container.

Using very hard or tough foods in the food processor is not recommended. Items such as meats with bones, fruits or vegetables with hard pits, and very hard legumes can damage the blades and motor of the device.

A food processor is a multi-functional kitchen appliance designed for quick and easy food preparation. With it, you can: Chop, grate, slice, and puree ingredients Grind and blend various foods Extract juice from fruits and citrus NS-627 model: equipped with a whisking function NS-628 model: includes a juicing feature

No, the food processor is not designed for grinding meat. However, if you use boneless and cartilage-free chicken or beef, the device can thoroughly chop and mince it.

The food processor and blender jar can be used continuously for up to 3 minutes, while the grinder should not exceed 30 seconds of continuous operation. Exceeding these limits may overheat the motor, reduce performance, and shorten the device’s lifespan. Following these guidelines ensures optimal performance, safety, and long-term durability.

Always unplug your food processor before cleaning. Handle blades and internal parts carefully to avoid injuries. Wash all removable parts with caution, paying close attention to sharp edges. After washing, completely dry all components before reassembling. Following these steps ensures safe use, prolongs the life of your appliance, and prevents accidents from sharp blades.

It is recommended to use the hand blender intermittently: operate it for 30 seconds continuously, then allow it to rest for 1 minute. For optimal performance and safety, use speed settings between level 1 and level 3.

Continuous and excessive use of the device, especially when processing heavy ingredients, can damage the blade coupler and motor coupler. To prevent this issue, avoid overloading the appliance or applying excessive pressure during operation.

The hand blender is ideal for mashing, mixing, and pureeing soft to semi-firm ingredients such as vegetables, fruits, soups, and puréed dishes. It is not recommended for very hard ingredients or large quantities to prevent damage to the device.

The hand blender is suitable for crushing frozen fruits and can also handle ice cubes. However, it is recommended to use smaller ice cubes to prevent damage to the device.

Yes, all hand blender parts can be repaired or replaced. In case of any issues, you can contact Nasa Electric after-sales service centers.

Always unplug the device before removing parts for cleaning. Never touch the blades with your hands or any object. Do not attempt to sharpen the blades yourself. Keep the device out of reach of children. It has high power and speed, so never turn it on out of curiosity.

For optimal performance and to prevent splattering, use a deep, bowl-shaped container that allows the ingredients to be blended efficiently.

Reduced suction can occur due to several reasons, such as clogged brushes or telescopic tubes, a damaged hose, a full dust bag, or a worn-out motor. To resolve the issue, inspect these components and repair or replace them as needed.

No, the HEPA filter is not washable and must be replaced if it becomes dirty or damaged.

Activation of the thermal guard to prevent the motor from overheating, usually due to prolonged continuous use. In this case, unplug the device and wait about 30 minutes before turning it on again. Full dust bag, which reduces the vacuum’s performance. Clogged inlet or outlet filters due to dust accumulation; clean or replace the filters as needed. If the problem persists, please contact Nasa Electric’s after-sales service center.

Nasa Electric recommends using a paper bag, as it captures dust more effectively and is easier to replace than reusable bags.

The frequency of checking and replacing vacuum filters depends on how often and what type of use the device gets. Generally, it is recommended to inspect the filters regularly and clean or replace them if dirt buildup or reduced performance is observed. Following this practice helps maintain optimal efficiency and extends the vacuum’s lifespan.

No, standard vacuums are not designed to pick up liquids. For this purpose, you should use a wet & dry vacuum to ensure optimal performance and safety.

According to Nasa Electric, the vacuum hose should never be washed with water. To clean it, use appropriate dry tools to remove dust and debris, avoiding direct contact with water to prevent damage.

Avoid continuous and prolonged use of the vacuum cleaner. Always replace or clean the dust bag before it becomes completely full. Note that disposable bags cannot be washed or reused. Do not vacuum liquids, wet substances, or overly moist materials. Avoid collecting fine powders such as flour, plaster, or similar materials. Never vacuum broken glass, sharp objects, or other hazardous materials. Periodically clean or replace the vacuum’s filters. Avoid collecting materials like insecticide powders that may cause respiratory irritation or unpleasant odors; use hygienic bags whenever possible.